endure high pressure solar collector for water

flat plate solar thermal collectors 1. flat panel collector 2.solar working project 3.pressure 4.solar energy heating

flat collector water heater solar 

High efficiency flat plate solar collector

Flat-plate collectors are the most common solar collectors for use in solar water-heating systems in homes and in solar space heating. A flat-plate collector consists basically of an insulated metal box with a glass or plastic cover (the glazing) and a dark-colored absorber plate. Solar radiation is absorbed by the absorber plate and transferred to a fluid that circulates through the collector in tubes.

1. Features compare to vacuum tube collector(1) More energy output from a unit area, less roof occupied;(2) Plate-grid structure, fluid heated in the copper pipe with faster heat transfer; (3) Working with pressure, better stagnation performance;(4) Graceful outline, well matched to the building;(5) Stable quality, free maintenance and long life span.

2. Advantages of DAILY flat plate solar collector(1)Blue titanium coating, with high absorptivity 95±2% and low emissivity 4±2%, stable performance, life span 50years;(2)Special design structure, 360°heat transfer, excellent thermal conductivity;(3)Optical low iron tempered glass cover, light transmit up to 92%, reflection and refraction make the “greenhouse effect” shaped in the cavity, reduce heat loss;(4)Integrated frame design, nice outlook, stable structure, easy to install;(5)Integrated polyurethane foaming, thicken back and side insulation, less heat loss;(6)12 riser tubes design, better than the normal 7/ 8 tubes, absorber plate surface thermal migration greatly reduced;

Glass cover	Material	Tempered glass	Low iron tempered glass	Wove tempered glass
	Layers	1	1	1
	Thickness(mm)	3.2	3.2	3.2
	Transmission	≥ 90%	≥ 92%	≥ 90%
	Total area(mm)	2000×1000	2000×1000	2000×1000
	Absorbing area(m2)	1.8	1.8	1.8
Absorbing plate	Material	Riser tube:copper; Absorbing plate: Al	Riser tube:copper; Absorbing plate: Al	Riser tube:copper; Absorbing plate: Al
	Riser tube spec and Qty	Φ10*0.5/12	Φ10*0.5/7	Φ10*0.5/7
	structural style	Plate-grid	Plate-grid	Plate-grid
	Coating	Blue titanium	Blue titanium	Blue titanium
	Absorptivity	≥ 0.95±0.02	≥ 0.95±0.02	≥ 0.95±0.02
	Emissivity	≤0.04±0.01	≤0.04±0.01	≤0.04±0.01
Frame and insulation	Insulation thickness(mm)	30	30	30
	Side insulation material	PU	PU	PU
	Back insulation material	PU	PU	PU
	Back board	Galvanized sheet	Galvanized sheet	Galvanized sheet
	Frame material	Al	Al	Al
Heat performance	Average daily heat efficiency	52.80%	56.90%	52.80%
	Average heat loss(W/m)	4	4	4
Weight(Kg)		48.5	41.8	41.3
Inlet/outlet(in)		G3/4"
Maximum working pressure		1.2Mpa
Dimension		2000×1060×90(mm)

 

Note:(1) We reserve the rights to make changes or improvements of the products. Parameters are subject to change without notice.(2) We can also make special orders according to client requirements.

ModelsTTFC	Specification of riser tube		Collector area( m²)	Dimension	Absorbing material		Connection	G.W(Kg)
	Diameter*thickness( mm)	Qty		L*W*H(mm)	Coating	Material
TTFC-A-2.0/12	Φ10*0.5	12	1.8	2000*1000*90	Blue Titanium Oxynitride	Al	G3/4"	44.9
TTFC-B-2.0/12	Φ10*0.5	12	1.8	2000*1000*90	Blue Titanium Oxynitride		G3/4"	48.5
TTFC-B-2.0/7	Φ10*0.5	7	1.8	2000*1000*90	Blue Titanium Oxynitride		G3/4"	41.3
TTFC-C-2.0/7	Φ10*0.5	7	1.8	2000*1000*90	Blue Titanium Oxynitride	TU1	G3/4"	41.8

endure high pressure solar collector for water